NORTH safety products
"THE ORIGINAL" VALVE LOCKOUT
5 different sizes to cover valve handles from 1" to 14" diameter
VS02 from 1" to 2 1/2"
VS04 from 2 1/2" to 5"
VS06 from 5" to 6 1/2"
VS09 from 6 1/2" to 10"
VS13 from 10" to 14"
The V-SAFE valve cover consists of two flattened half moons that completely cover the valve wheel.
- Made of strong “Polypropylene” plastic.
- Fully dielectric.
- Highly resistant to solvents and other chemical products.
- Highly resistant to cracking and abrasion.
- Resistant to extreme temperature changes - 50 F (- 46 C) to 360 F (183 C).
- Available in the 4 colors RED, YELLOW, BLUE and GREEN (colors recommended in ANSI Z353.1)
ELECTRICAL PLUG LOCKOUT
The E-SAFE "LOCK-A-PLUG" completely encloses the plug from any accidental reconnection. The electrical cable is inserted through the opening and then closed. The single entry (LP110) or multiple entry (LP550) locking system avoids usage by unauthorized personnel during critical times. The E-SAFE is a practical and positive protection system.Made out of “Polypropylene” plastic, it is totally dielectric, resists cold or hot temperatures up to 300O F / 149O C, has a sliding closure and an integrated multiple lockout.
BALL VALVE LOCKOUT
BS01 Valves from 3/8" to 1 1/4"
BS02 Valves from 1 1/2" to 2 1/2"
BS03 Valves from 2" to 8"
- Made of strong “Polypropylene” plastic.
- Fully dielectric.
- Highly resistant to solvents and other chemical products.
- Highly resistant to cracking and abrasion.
- Resistant to extreme temperature changes - 50 F (- 46 C) to 360 F (183 C).
- Available in the 4 colors RED, YELLOW, BLUE and GREEN (colors recommended in ANSI Z353.1)
Note: Only the BS01 can lock in the open position.
BUTTERFLY VALVE LOCKOUT
BS04
Features
- Made of strong “Polypropylene” plastic.
- Fully dielectric.
- Highly resistant to solvent and other chemical products.
- Highly resistant to cracking and abrasion.
- Resistant to extreme temperature changes -50 F (-46 C) to 360 F (183 C).
- Available in the 4 colors RED, YELLOW, BLUE and GREEN (colors recommended in ANSI Z353.1)
CIRCUIT BREAKER LOCKOUTS
Constructed of rigid plastic, the new C-SAFE circuit breaker lockouts are now
available for either single or double pole circuit breaker lockout applications.
CB01 A single pole lockout, CB01 requires a switch breaker with a recessed hole in it.
CB02 The CB02, is a double pole lockout and requires the breakers to be connected with a cross bar for lockout application.
CB03 A single pole lockout, CB03 does not require a switch breaker with a recessed hole in it.
CB04 Our double pole circuit breaker lockout CB04 will fit most major brands of electrical circuit breakers.
ELECTRICAL SWITCH LOCKOUT
ES01
E-SAFE "LOCK-A-SWITCH" This easy to install device can be used with most mounted
switches. It can be used to lock the switch in either the “on” or “off ” position.
LOCKOUT TAGS
All lockout tags are 3” x 5-3/4”in size and made of rugged stain and mildew resistant 20 mil. styrene with grommets for greater strength.
